Creality K2 Plus - Equipment Specifications

1.3 Equipment Specications
Parameters
Model
Print size
Pinter size
Suppoed laments
Air lter
Nozzle diameter
Nozzle temperature
Hotbed temperature
Screen
K2 Plus
350*350*350mm
495*515*640mm
Single set net weight
35kg
PLA/ABS/PETG/PA-CF/PLA-CF/PET/ASA/PPA-CF
Yes
0.4mm
Extruder type
Printing speed
Acceleration
Proximal dual gear extruder
≤600mm/s
≤30000mm/s²
≤350℃
≤120℃
≤60℃
Chamber temperature
100-240V~, 50/60Hz
Rated voltage
4.3-inch color touch screen
Yes
Chamber camera
Yes
Nozzle camera
Yes
Power loss recove
Yes
Automatic relling
Slicing software
Yes
Lighting lamp
Creality Print 5.0 and higher
Yes
Active chamber heating
USB ash drive /Ethernet/Wi-Fi
Working mode
Flexible printing plate
Printing platform
Automatic leveling
Leveling method
05
1. Printer Information