Creality K2 Plus - Table of Contents

1. Printer Information
01-06
·····················································································
01-02
·························································································
1.1 Packing List
03-04
·····················································································
1.2 About the Printer
05-05
···············································································
1.3 Equipment Specications
06-06
······················································································
1.4 Equipment Size
3. Product Usage
14-17
·························································································
14-14
·······················································································
3.1 User Inteace
15-16
·······································································
3.2 Loading Filament From Spool Holder
17-17
·············································································
3.3 Loading Filament From CFS
4. First Use
18-21
······························································································
18-18
·······················································································
4.1 Filament Setup
19-19
······························································································
4.2 Print
20-21
···················································································
4.3 Creality Print Slicing
2. Unboxing
07-13
·····························································································
07-08
·················································
2.1 Remove Screw Rod Holder, Hotbed Locking Screws, Camera cover
09-09
····················································································
2.2 Install Accessories
10-11
······················································································
2.3 Connecting CFS
12-12
·········································································
2.4 Connecting Multiple CFSs for Use
13-13
·····················································································
2.5 Power-on Guide
Contents