NOTES
1. Do not use the printer in any way other than described herein in order to avoid personal inju or propey damage;
2. Do not place the printer near any heat source or ammable or explosive objects. We suggest placing it in a well-venti-
lated, cool and dustless environment;
3. Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print
quality;
4. Please use recommended laments to avoid clogging of the extrusion head and causing damage to the machine;
5. Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet,
which accompanies the printer;
6. Do not touch the nozzle and the heated bed during operation to avoid burns or personal inju;
7. Do not wear gloves or wraps while operating the machine to prevent entrapment of movable pas that could cause
crushing and cutting injuries to bodily pas;
8. Use the provided tools to clean the lament from the extruder in time taking advantage of the residual temperature
after printing. Do not touch the extruder directly when cleaning, otherwise it may cause burns;
9. Clean the printer frequently. Clean the printer body with a d cloth regularly after powering o the printer, wipe away
dust, bonded print lament and foreign objects on the guide rails;
10. Children under 10 years old should not use the printer without supeision, otherwise it may cause personal inju;
11. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment
is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our
products or equipment for any illegal purposes; Creality will not be responsible for any violators' legal liability under any
circumstance;
12. Tip: Do not plug in or unplug wires on a charged basis.
To Next Page
Loading...
