Creality K2 Plus - Page 2

Thank you for choosing Creality. For your convenience, please read through this User Manual before you sta and follow
the instructions provided carefully.
Creality is always ready to provide you with high-quality seices. If you encounter any issues or have any questions when
using our products, please use the contact information at the end of this manual to contact us. To fuher improve your
user experience, you can nd more about our devices via the following methods:
User manual: You can nd instructions and videos in the USB ash disk provided with the printer.
You can also visit our ocial website (https://www.creality.com) to nd information regarding software, hardware,
contact information, device instructions, device warranty information, and more.
1. You can upgrade the rmware directly through the device screen;
2. You can upgrade the rmware via the Creality Cloud OTA;
3. Please visit the ocial website https://www.creality.com, click on “Suppo → Download Center ” , select the corresponding
model to download the required rmware, (Or click on“Creality Cloud → Downloads → Firmware”) , after installation is complete,
you can use it.
To Our Dear Users
Firmware Upgrade
Product Operation and After-Sales Seice Information
1. You can log in to the Creality Ocial Wiki (https://wiki.creality.com) to explore more
detailed after-sales seice tutorials.
2. Or contact our after-sales seice center at +86 755 3396 5666, or send e-mail to
cs@creality.com.
Creality Wiki