Crestron CP3N Reference Guide

Reference Guide – DOC. 7150B 3-Series Control Systems • 9
Time and Date Settings
The internal clock of the control system can be configured using console
commands.
1. Issue the timedate command to manually set the time and date.
• Syntax: timedate [hh:mm:ss mm-dd-yyyy]
o For hh:mm:ss, enter the time in hours (using 24-hour format),
minutes, and seconds format.
o For mm-dd-yyyy (or mm/dd/yyyy), enter the date in month (1–12),
day (1–31), and year format.
• Example: timedate 12:18:30 03-14-2019
2. Issue the timezone command to set the time zone:
• Syntax: timezone [LIST | zone]
o For zone, enter the three-digit code for the time zone.
o Use the LIST parameter to print a list of all time zones and their
codes in the console.
• Example: timezone 014
3. Issue the SNTP START command to synchronize the internal clock with an
SNTP server:
• Syntax: SNTP START [SERVER:address] [PERIOD:time]
o For SERVER, enter the address (in dot decimal notation) of the
SNTP server.
o For PERIOD, enter the interval (in minutes, minimum is 10) that the
internal clock synchronizes with the SNTP server.
• Example: SNTP START SERVER:255.255.255.255 PERIOD:60
The internal clock can also be set using the System Clock function in Crestron
Toolbox. For more information, refer to the Crestron Toolbox help file.

Crestron CP3N Specifications

General

Internal memory	0.5 GB
Storage media type	Flash
Internal memory type	SDRAM
Internal storage capacity	4 GB
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	24 W
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Product color	Black
Heat dissipation	50 BTU/h
Housing material	Metal
Ethernet LAN (RJ-45) ports	2

Weight and Dimensions

Depth	167 mm
Width	439 mm
Height	44 mm
Weight	1420 g