Crestron CP3N Reference Guide

2 • 3-Series Control Systems Reference Guide – DOC. 7150B
Tools and Utilities
Standard IT tools, such as SFTP (secure file transfer protocol) clients and SSH
(secure shell) clients, can be used to initiate various control system tasks and
functions.
Additionally, the following Crestron tools and utilities may be used to program
and configure the control system:
• Crestron Studio® software
• Crestron Toolbox™ software
• SIMPL Debugger
• SIMPL Windows
• SIMPL Sharp Pro
• VT-Pro e® software
All tools and utilities may be downloaded from www.crestron.com/Support
. For
more information on the features and functions of each tool, refer to its
embedded help file.
NOTE: Access to software downloads and other files is reserved for Authorized
Crestron dealers, Crestron Service Providers (CSPs), and Crestron partners only.
New users must register for an account to access certain areas of the Crestron
website. For more information on registering, navigate to
https://www.crestron.com/register.

Crestron CP3N Specifications

General

Internal memory	0.5 GB
Storage media type	Flash
Internal memory type	SDRAM
Internal storage capacity	4 GB
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	24 W
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Product color	Black
Heat dissipation	50 BTU/h
Housing material	Metal
Ethernet LAN (RJ-45) ports	2

Weight and Dimensions

Depth	167 mm
Width	439 mm
Height	44 mm
Weight	1420 g