EasyManuals Logo

Crestron CP3N Reference Guide

Crestron CP3N
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
32 3-Series Control Systems Reference Guide DOC. 7150B
Audit Logging
Audit logging can be enabled on the control system to track logons, logoffs,
account management changes, and console commands.
NOTE: Logons, logoffs, and authentication management is always logged by the
control system regardless of audit log settings.
Configure Audit Logging
To configure audit logging on the control system, issue the AUDITLogging
command. Audit logging is turned off by default.
Syntax: AUDITLogging [ON|OFF] {[ALL]|[NONE]|{ADMIN] [PROG]
[OPER] [USER]} [REMOTESYSLOG]}
o ON: Turns on audit logging
o OFF: Turns off audit logging
o No parameter: Displays the current audit logging setting
o The following access level parameters are optional and are used to log
commands by access level:
ADMIN: Logs administrator-level commands
PROG: Logs programmer-level commands
OPER: Logs operator-level commands
USER: Logs user-level commands
ALL: Logs all commands
NONE: Logs no commands
o REMOTESYSLOG: Writes to the remote syslog server only
Example: AUDITLogging ON ADMIN OPER
Example log output: [2018-11-30T07:02:44-08:00]: EVENT:
COMMAND(SHELL 172.30.255.255) USER: admin # AUDITLogging on all
View Audit Logs
To display the audit log in the console, issue the GETAUDITLOG command.
To print the last 50 audit log entries in the console, issue the PRINTAUDITLOG
command. The optional ALL parameter can be appended to print the entire log.
NOTE: Use the Audit Logs function in Crestron Toolbox to change the audit log
storage location and file name. For more information, refer to the Crestron
Toolbox help file.
Clear Audit Log
To clear all entries in the audit log, issue the CLEARAUDITLOG command.

Other manuals for Crestron CP3N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Crestron CP3N and is the answer not in the manual?

Crestron CP3N Specifications

General IconGeneral
Internal memory0.5 GB
Storage media typeFlash
Internal memory typeSDRAM
Internal storage capacity4 GB
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)24 W
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Product colorBlack
Heat dissipation50 BTU/h
Housing materialMetal
Ethernet LAN (RJ-45) ports2
Weight and Dimensions IconWeight and Dimensions
Depth167 mm
Width439 mm
Height44 mm
Weight1420 g

Related product manuals