Crestron CP3N Reference Guide

18 • 3-Series Control Systems Reference Guide – DOC. 7150B
Blocked User Functions
If authentication is enabled, administrators are able to block users from
accessing the control system via the console and Crestron Toolbox.
Add User to Blocked List
To add a user to the blocked list, issue the ADDLOCKEDUser command.
• Syntax: ADDLOCKEDUser [name]
o name: Enter the user account that will be blocked.
o No parameter: Lists all blocked user accounts
• Example: ADDLOCKEDUser jsmith1
Remove User from Blocked List
To remove a users from the blocked list, issue the REMBLOCKEDUser command.
• Syntax: REMBLOCKEDUser [name]
o name: Enter the user account that will be removed from the blocked
list
o No parameter: Lists all blocked user accounts
• Example: REMBLOCKEDUser jsmith1
Blocked IP Address Functions
When a user reaches the maximum number of login attempts over an Ethernet
connection, the client's IP address is blocked.
Change Lock out Time
To change the duration (in hours) that an IP address is blocked by the console,
issue the SETLOCKOUTTIME command.
• Syntax: SETLOCKOUTTIME [number]
o number: The number of hours to block an IP address. Entering 0 blocks
the IP address indefinitely. 255 is the maximum value. The default
value is “24.”
o No parameter: Displays the current setting
• Example: SETLOCKOUTTIME 24

Crestron CP3N Specifications

General

Internal memory	0.5 GB
Storage media type	Flash
Internal memory type	SDRAM
Internal storage capacity	4 GB
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	24 W
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Product color	Black
Heat dissipation	50 BTU/h
Housing material	Metal
Ethernet LAN (RJ-45) ports	2

Weight and Dimensions

Depth	167 mm
Width	439 mm
Height	44 mm
Weight	1420 g