Crestron CP3N - Problem Solving and Troubleshooting Guide; Device Not Functioning Troubleshooting; MSG LED Error Troubleshooting; Compilation Error Resolution

Reference Guide – DOC. 7150B 3-Series Control Systems • 19
Add IP Address to Blocked List
To add an IP address to the blocked list manually, issue the ADDBLOCKEDip
command.
• Syntax: ADDBLOCKEDip [ipaddress]
o ipaddress: Enter the IP address that will be blocked.
o No parameter: Lists all blocked IP addresses
• Example: ADDBLOCKEDip 255.255.255.255
Remove IP Address from Blocked List
To remove an IP address from the blocked list manually, issue the REMBLOCKEDip
command.
• Syntax: REMBLOCKEDip [ipaddress]
o ipaddress: Enter the IP address that will be removed from the
blocked list.
o No parameter: Lists all blocked IP addresses
• Example: REMBLOCKEDip 255.255.255.255