Crestron CP3N Reference Guide

28 • 3-Series Control Systems Reference Guide – DOC. 7150B
Firmware Updates
To take advantage of all the latest device features, the control system should
always contain the latest firmware, which is available for download at
www.crestron.com/Support
.
NOTE: Access to firmware is reserved for Authorized Crestron dealers, Crestron
Service Providers (CSPs), and Crestron partners only. New users must register
for an account to access certain areas of the Crestron website. For more
information on registering, navigate to
https://www.crestron.com/register.
To perform a firmware update:
1. Download the latest device firmware (.puf file) at
www.crestron.com/Support
.
2. Use an SFTP client to transfer the firmware .puf file to the control
system's /firmware directory.
3. Issue the PUF <filename> command in the control system console, where
<filename> is the complete filename of the .puf file.
NOTE: Firmware updates can be scheduled using the control system’s auto
update mechanism. For more information, refer to “Auto Update Mechanism” on
page
46.
The Package Update Tool in Crestron Toolbox can also be used to send firmware
to the control system and to manage the firmware update. For more
information, refer to the Crestron Toolbox help file.

Crestron CP3N Specifications

General

Internal memory	0.5 GB
Storage media type	Flash
Internal memory type	SDRAM
Internal storage capacity	4 GB
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	24 W
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Product color	Black
Heat dissipation	50 BTU/h
Housing material	Metal
Ethernet LAN (RJ-45) ports	2

Weight and Dimensions

Depth	167 mm
Width	439 mm
Height	44 mm
Weight	1420 g