To Next Page

To Previous Page

Aerial Connection

The CS2057 aerial is available with a 5 metre lead. This item is weatherproof

and may be mounted internally or externally where installation standards allow.

Do not cut, rejoin or lengthen the lead.

Plug the

aerial lead

connector

into the

DualCom

Aerial Lead

DualCom

Fig 4

CS2057

Install

the aerial

vertically.

Fig 3

An optional CS2056 Aerial Extention lead is available. This is 5 metres long.

When used, it will reduce the signal by approx 10%. Therefore, the aerial must

be positioned to improve the signal strength by at least 10% in order to provide

any benefit.

Aerial Lead

Top

Aerial

If the signal strength is

insufficient, relocate the aerial and

(if necessary) also relocate the

DualCom, extending the bus

wiring and other leads as required.

Questions and Answers:

Need help?

Do you have a question about the CSL GradeShift and is the answer not in the manual?

CSL GradeShift Specifications

General