To Next Page

To Previous Page

The CS5355 Wired LAN(IP) Card

The Wired LAN(IP) Card allows the DualCom GPRS to be connected to a LAN.

This typically will be a LAN for office computers where cabling is Cat 5 UTP

cable, and connectors are RJ45 type.

In addition, the Wired LAN(IP) Card includes all of the features of the CS2351

Expander Board. See page 18.

The LAN to which the Wired LAN(IP) Card is connected must:

1. have a route to the internet (the ‘default gateway’). This typically will be by

ADSL (broadband) communications. Without this, the Wired LAN Card will

not operate.

2. have either,

a). a DHCP server function so that the LAN(IP) Card will automatically

be given an IP address on the LAN, or...

b). the LAN(IP) Card must be programmed with a Fixed/Static IP address.

CSL will dispatch a DualCom and LAN(IP) Card fully programmed for operation

providing that the ‘default gateway’, IP address options and mask information

are provided with the order.

As with all DualCom setup details, this IP information can also be downloaded

to the DualCom and changed if required. Where IP addressing requires setting/

changing, please ensure that you are fully conversant with IP, Internet and

LAN conventions then contact CSL Technical Support.

Fig 6

Questions and Answers:

Need help?

Do you have a question about the CSL GradeShift and is the answer not in the manual?

CSL GradeShift Specifications

General