CTC Union SHDTU03-ET10R User Manual

Chapter 1. Introduction
1-8
!
The reset button can be used in one of two ways.
1. When you want to change the SHDTU03's configuration but you
forgot the user name or password, press the Reset Button for three or
four seconds with a paper clip or sharp pencil. Pressing the Reset
Button in this way will cause the SHDTU03 to load the factory default
settings and lose all of your configuration.
2. If the SHDTU03 is having problems connecting to the Internet and
you want to configure it again by clearing all configurations,
momentarily press the Reset Button with a paper clip or sharp pencil.
Pressing the Reset Button in this way will cause the SHDTU03 to load
the factory default configuration.

CTC Union SHDTU03-ET10R Specifications

General

Brand	CTC Union
Model	SHDTU03-ET10R
Category	Network Router
Language	English