CTC Union SHDTU03-ET10R User Manual

Chapter 3. Set-Up
3-2
The screen will prompt with the new configuration parameters. Check the parameters and Click
Restart The router will reboot with the new settings or Continue to configure other parameters.
Routing Mode
Routing mode contains settings for DHCP server, Point-to-Point Protocol over ATM and Ethernet,
IP over ATM and Ethernet over ATM.
You need to clarify which Internet
protocol is provided by your ISP.
Click ROUTE and CPE Side then
press Next.
Type LAN parameters:
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
Host Name: SOHO
DHCP Service: Enable
The default setup will Enable the
DHCP server. If you want to turn off
the DHCP service, choose Disable.

CTC Union SHDTU03-ET10R Specifications

General

Brand	CTC Union
Model	SHDTU03-ET10R
Category	Network Router
Language	English