Chapter 3. Set-Up
3-8
WAN
The SHDSL router supports up to 8 PVCs. The parameters are
setup under WAN.
The WAN Number 1 will be the parameters
setup in Basic Setup. If you want to setup
another PVC, you may configure them in
WAN 2 to WAN 8.
Enter the parameters.
Press Finish to finish setting.
The screen will prompt with the parameters
that will be written to Flash. Check the
parameters before writing to Flash. Press Restart to restart the router with the new configuration
or press continue to setup other parameters.
To Next Page
Loading...
