Chapter 7. Serial Console or Telnet Mode
7-2
Window structure
From top to bottom, the window will be divided into four parts:
1. Product name
2. Menu field: Menu selection items are prompted on this field. The “>>” symbol indicates the
cursor position.
3. Configuration field: You will configure the parameters in this field. < parameters >
indicates the parameters you can choose and < more…> indicates that there is another
submenu in the title.
4. Operation command for help
The following table shows the parameters in the brackets.
Command Description
<ip> An item enclosed in brackets is required. If the item is shown in
lower case bold, it represents an object with special format. For
example, <ip> may be 192.168.0.3.
<Route|Bridge> Two or more items enclosed in brackets and separated by vertical
bars means that you must choose exactly one of the items. If the item
is shown in lower case bold with leading capital letter, it is a
command parameter. For example, Route is a command parameter
in <Route|Bridge>.
[1~1999] An item enclosed in brackets is optional.
[1~65534|-t] Two or more items enclosed in brackets and separated by vertical
bars means that you can choose one or none of the items.
To Next Page
Loading...
Need help?
General
