Chapter 7. Serial Console or Telnet Mode
7-3
Menu Driven Interface Commands
Before changing the configuration, familiarize yourself with the navigation keys listed in the
following table. The operation list will be shown on the window.
Keystroke Description
[UP] or I Move to field above in the same level menu.
[DOWN] or K Move to field below in the same lever menu.
[LEFT] or J Move back to previous menu.
[RIGHT] or L Move forward to submenu.
[ENTER] Move forward to submenu.
[TAB] To choose another parameters.
Ctrl + C To quit the configuring item.
Ctrl + Q For help
To Next Page
Loading...
