Cub Cadet 6X4 User Manual

Chapter 1: Introduction
2
2. UNDERSTANDING UTILITY VEHICLE MODEL
NUMBERS
e.g.: 37AJ467D710
• 37 - - - - - - - - - indicates that this is a U.V.
• - - A - - - - - - - - indicates the engineering level
• - - - J - - - - - - - indicates the engine type
• - - - - 4 - - - - - - indicates the number of wheels
• - - - - - 67 - - - - indicates the series and trim
• - - - - - - - D - - - indicates the type of tires
• - - - - - - - - 710 indicates that it is Cub Cadet
2.1. Engine type detail:
• B = Kohler Command 18 H.P. V-twin
• C = Kohler Command 20 H.P. V-twin
• J = Caterpillar Diesel 20 H.P. liquid cooled
• N = Kawasaki 9.5 H.P. single, inclined
• R = Honda 18 H.P. V-twin
• S = Honda 20 H.P. V-twin
2.2. Series detail:
• 1 = poly-bed 4 x 2
• 3 = steel bed 4 x 2
•4 = 6 x 4
•6 = 4 x 4
2.3. Trim detail:
• 0 = yellow on 6 x 4 and 4 x 2
• 1 = camouflage on 6 x 4 and 4 x 2
• 2 = fire rescue red on 6 x 4 and 4 x 2
• 6 = yellow on 4 x 4
• 7 = camouflage on 4 x 4
2.4. Tires
• A = turf tires
• B = knobby tires
• C = heavy-duty tires
• D = trail tires
• E = Fire Rescue: f. run-flat tires, r. trail tires
• G = poly-bed trail tires
3. PROFESSIONAL SHOP MANUAL INTENT
This Manual is intended to provide service dealers with
an introduction to the mechanical aspects of the new
vehicle.
This Professional Shop Manual covers the second
generation Cub Cadet Utility Vehicles more specifically,
and in greater depth than the origanal Shop Handbook.
• The content in this manual supersedes any con-
tent in the handbook.
• Detailed service information about the engine
will be provided by the engine manufacturer, in
most cases.
Disclaimer: This manual was written using second
generation vehicle. The information contained in this
handbook is correct at the time of writing. Both the
product and the information about the product are sub-
ject to change without notice.
About the text format:
NOTE: is used to point-out information that is
relevant to the procedure, but does not fit as a
step in the procedure.
CAUTION: is used to point-out potential danger
to the technician, operator, bystanders, or sur-
rounding property.
• Bullet points: indicate sub-steps or points.
Disclaimer: This Professional Shop Manual is
intended for use by trained, professional technicians.
• Common sense in operation and safety is
assumed.
• In no event shall MTD or Cub Cadet be liable for
poor text interpretation, or poor execution of the
procedures described in the text.
• If the person using this manual is uncomfortable
with any procedures they encounter, they should
seek the help of a qualified technician or Cub
Cadet Technical Support.

Cub Cadet 6X4 Specifications

General

Brand	Cub Cadet
Model	6X4
Category	Utility Vehicle
Language	English