User Manual Control Units
www.cuesystem.com
Page 32 of 44
4.5. Connecting the Host Computer
The standard data cable is used for a connection between the Assistant or Assistant-S connector
marked HOST COMPUTER and a PC serial port (COMx). The cable length up to 20 m.
We recommend the standard serial cable with Sub-D, 9-pin, male and Sub-D, 9-pin, female
connectors with all pin to pin connection. At least the connection between pins 2, 3, 5, 7 must be
provided. If your computer has the serial COM port of Sub-D, 25-pin connector use the 25-pin / 9-pin
reduction.
Assistant connection
HOST COMPUTER MEMORY CARD PCMCIA STANDARD IR SERIAL I/O ANALOG GENERAL I/O
TEST RESETDATA OPT.
POWERAUXILIARY
1342 9 10111213141516 +12-12+55786 9134213425786 1718 192021222324
Control Cable 9-pin
Assistant-S connection
HOST CO MPUTER DATA
RESETTEST
IR SERIAL I/O ANALOG GE NERAL I/ O
1 3 42 5 7 86 9 1 3 42 1 3 42 5 7 86
POWER
Control Cable 9-pin
To Next Page
Loading...