Curtis 1220 - Page 29

Curtis 1220 Manual, Rev. C
25
4 — MONITOR MENU: Voltage, Inputs & Outputs
Monitor Menu: VOLTAGE
DISPLAY
VARIABLE RANGE DESCRIPTION
Battery Voltage 0 – 36.3 V Voltage of battery.
Capacitor Voltage 0 – 36.3 V Voltage of steer controller’s internal
capacitor bank.
Motor Voltage
0 – 36.3 V Voltage measured between the steer motor
connectors.
5V Out
0 – 9.00 V Voltage measured at the +5V output.
Monitor Menu: INPUTS and OUTPUTS
DISPLAY
VARIABLE RANGE DESCRIPTION
Main Driver Off / On Flag indicating the main relay driver status.
Main Coil Feedback Off / On Flag indicating the main relay coil feedback
status. If it does not match the main relay
driver status, a fault is issured.
Fault Output
Off / On Flag indicating the Fault Output status.
Fault Output Feedback Off / On Flag indicating the Fault Output feedback
status. If it does not match the Fault Output
status, a fault is issured.
Interlock Switch
Off / On Flag indicating the interlock switch status.
Home Switch Off / On Flag indicating the home switch status.