To Next PageTo Next Page
Need help?Do you have a question about the Curtis 1244-64 series and is the answer not in the manual?
General| PWM frequency | 16 kHz |
|---|---|
| Type | MOSFET |
| Voltage | 36-48V |
| Operating Temperature | -40°C to +50°C |
| Protection Features | Overtemperature, overvoltage, undervoltage, short circuit |
Explains the low and high current connection pins and their functions.
Parameters controlling acceleration and deceleration rates, quick start, and taper.
Settings for maximum speed, creep speed, and regen speed thresholds.
Configuration for control mode, throttle type, deadband, and maximum throttle.
Parameters for drive, braking, field current limits, restraint, and current ratio.
Settings for High Pedal Disable (HPD), Static Return to Off (SRO), and fault codes.
Procedures for setting throttle deadband and throttle max parameters.
Adjusting current and field parameters to match motor specifications.
Steps to set the maximum unloaded vehicle speed using Field Min/Max.
Provides diagnostic information and fault history access.
Using the programmer for plain language fault display and status monitoring.
