Curtis MultiMode 1215-8 User Manual

Curtis 1214-/15-/19-8 Manual iii
FIGURES
FIG. 1: Curtis 1215-8 motor controller ....................................1
FIG. 2: Mounting dimensions,
Curtis 1214-/15-/19-8 controller ................................. 3
FIG. 3: Standard wiring diagram ..............................................6
FIG. 4: Wiring for 5kΩ–0 throttle (“Type 1”) ......................... 8
FIG. 5: Wiring for 20kΩ pot used as a wigwag-style
throttle (“Type 1”) .......................................................9
FIG. 6: Wiring for 0–5kΩ throttle (“Type 3”) ......................... 9
FIG. 7: Wiring for 0–5V throttle (“Type 2”).......................... 10
FIG. 8: Wiring for 0–10V throttle (“Type 2”)........................ 11
FIG. 9: Wiring for 3-wire pot throttle (“Type 2”) ..................11
FIG. 10: Wiring for Curtis ET-XXX electronic throttle
(“Type 2”) ................................................................. 12
FIG. A-1: Ramp shape (throttle map) for controller with
maximum speed 100% and creep speed 0 ................ A-8
FIG. A-2: Ramp shape (throttle map) for controller with
maximum speed 100% and creep speed 10%........... A-9
FIG. A-3: Ramp shape (throttle map) for controller with
maximum speed 60% and creep speed 10%............. A-9
TABLES
TABLE 1: Troubleshooting chart ................................................ 20
TABLE 2: LED codes ................................................................. 21
FIGURES / TABLES

Curtis MultiMode 1215-8 Specifications

General

Brand	Curtis
Model	MultiMode 1215-8
Category	Controller
Language	English