EasyManua.ls Logo

CYBEX Arc Trainer 600A - Drive Belt Maintenance

CYBEX Arc Trainer 600A
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Drive Belt Maintenance
There are two drive belts that may become loose, worn or cracked. See Figure 1.
Primary Belt — This is the
wider of the two belts. It has
grooves that keep it aligned on
the large upper pulley. Unless
the unit has been serviced and
not put back together properly,
it is unlikely that the primary
belt will need to be
re-tensioned.
Secondary Belt — This is the
narrower of the two belts. It
has grooves that keep it
aligned on the flywheel’s drive
pulley. It is unlikely that the
secondary belt will become
loose because it is a stretch-fit
belt. Unless the unit has been
worked on and not put back
together properly, it is unlikely
the tension will change.
Follow this Drive Belt Maintenance procedure to ensure that the belts are
tensioned properly and in good condition. See the Service Schedule in this
chapter for a minimum schedule for checking the belt tension and condition.
NOTE: To remove and replace the belts a qualified service technician should
follow the Drive Belts procedure in the Service chapter.
Tools Required
Phillips head screwdriver
! WARNING: Disconnect the power cord before beginning this procedure.
Keep wet items away from inside parts of the unit. Electrical
shock could occur even if the unit is unplugged.
1. Read and understand this Drive Belt Maintenance section thoroughly
before proceeding to step 2.
2. Disconnect the external power source.
A. Turn the main power switch above the power inlet to the off (O) position.
B. Unplug the power cord from the power outlet.
Cybex Arc Trainer Owner’s & Service Manual
Page 4-3
Table of Contents . . . . . . . . . iii
Manual. . . . . . . . . . . . . . . . 3-20
4 Preventive Maintenance
Warnings/Cautions . . . . . . . 4-1
Regular Maintenance
Activities . . . . . . . . . . . . . . 4-1
Cleaning Your Cybex
Arc Trainer . . . . . . . . . . . . 4-2
Drive Belt Maintenance . . . . 4-3
Lubrication. . . . . . . . . . . . . . 4-5
Environment of the
Arc Trainer . . . . . . . . . . . . 4-5
Service Schedule. . . . . . . . . 4-6
Primary
Drive Belt
Figure 1
Secondary
Drive Belt

Table of Contents

Other manuals for CYBEX Arc Trainer 600A

Related product manuals