CYBEX FT 360 User Manual

Cybex FT 360 Functional Trainer Owner’s Manual
Technical
Specifications
Page 2-3
Adjustment Plate
• Shall be laser and plasma cut hot-rolled steel and nickel chromium electroplated.
Hardware
• All 3/8” socket head cap screws shall be of grade 8 (or equivalent). All bolts shall be either
chromed or zinc plated for additional corrosion resistance.
Adjustment Decals
• High contrast Lexan decals shall be used for adjustment arms and weight stack to ensure
maximum readability.
Instructional Placard
• Shall provide step-by-step instructions and a picture to illustrate use.
• Placard shall indicate proper positioning, and clearly describe the correct use of
machines.
Counter Balancing
• Rotational counter balancing shall be accomplished by the use of a class 2 extension
spring.
• Reach counterbalancing shall be accomplished by the use of a 13.35 inch, cylinder
dampner.
Shroud
• Front panel shall be made of shatter resistant PETG material and tinted Bronze #2370.

CYBEX FT 360 Specifications

General

Brand	CYBEX
Model	FT 360
Category	Fitness Equipment
Language	English