CYBEX FT-360S - Weekly Procedures

Cybex FT-360S Functional Trainer Owner’s Manual
Maintenance
Page 7-4
Weekly Procedures
1. Inspect all nuts and bolts for looseness. Tighten as required.
2. Inspect all cables for wear or damage and proper tension. When inspecting cables, run your fi ngers
on the cable, paying particular attention to bends in the cable and attachment points.
WARNING: Replace all worn cables immediately. The following conditions may indicate a
worn cable:
Figure 1
A kink in the cable. See Figure 2.•
A curled sheath. See Figure 3.•
Figure 2
Figure 3
Figure 4
“Necking”, a stretched cable sheath. See Figure 4.•
A tear or crack in the cable sheath that exposes the cable. See Figure 1. •