2. Resetting the service odometer.
A. While in Dormant Mode enter Test Mode by pressing and holding the Heart Rate and
Level keys simultaneously for five seconds.
B. Press the Cool Down key to display “SVC” and miles or kilometers on service
odometer.
C. Press the or key to display “RST”.
D. Press the Enter key to reset the service odometer to zero.
NOTE: Service may be performed before the 9,000 miles (14,500 km) service prompt appears.
Perform the service on the unit and follow the above procedure to reset the service
odometer to zero.
Cybex 425T Treadmill Service Manual
Preventive
Maintenance
Page 2-7
To Next Page
Loading...
Need help?
General
