FX3 Programmers Manual, Doc. # 001-64707 Rev. *C 155
FX3 Development Tools
4. All the available FX3 projects are shown. Select all the projects displayed and click “Finish”.
At the end of this step, all the projects for the FX3 firmware examples have been imported into the
eclipse workbench.
12.2.2.2 Building Projects
After the projects have been imported, they have to be built. The following steps describe the project
view and the build.
1. The view has to be switched to the project view. Select Window->Show View-> C/C++ Projects.
To Next Page
Loading...