Cypress EX-USB FX3 - Page 161

FX3 Programmers Manual, Doc. # 001-64707 Rev. *C 161
FX3 Development Tools
# correct value from list below.
# Clock input is 19.2 MHz: Value = 0x00080015
# Clock input is 26.0 MHz: Value = 0x00080010
# Clock input is 38.4 MHz: Value = 0x00080115
# Clock input is 52.0 MHz: Value = 0x00080110
monitor memU32 0xE0052000 = 0x00080015
# Add a delay to let the clock stabilize.
monitor sleep 1000
set $pc =0x40000000
si
si
si
si
The run command is “load”
.