CZone Touch 5 - Figure 4. Modes Configuration Example

13
EN / CZone Touch 5 User & Installation Manual
Modes are configured by the builder using the CZone Configuration Tool. Only one mode from a
‘mode group’ can be selected at a time; most systems have only one mode group.
If the Modes page has ticks beside two or more modes then the system has more than one mode
group. In that case several modes can be in force at a time, one from each group, and an Off button
may appear beside the On button shown above.
Below is an example which summarises the effect that selecting a mode has on the vessels systems.
The builder should supply a similar summary for each of the modes configured.
Modes Configuration
Systems
On
Day
Cruise
Night
Cruise
Systems
Off
Backlight Zone 1
On
On
On (30.0%)
Off
Cabin Lights
On
Off
On (2.0%)
Off
Charger
Not Used
Not Used
Not Used
Not Used
Courtesy Lights Blue
Off
Off
On
Off
Courtesy Lights White
On
On
Off
Off
Fan
Off
On
On
Off
Fresh Water Pump
On
On
On
Off
Galley Lights
On
Off
On (2.0%)
Off
Hatch Lifter
Not Used
Not Used
Not Used
Not Used
Navigation Lights
Off
Off
On
Off
Saloon Lights
On
On
On (2.0%)
Off
Figure 4. Modes Configuration Example