DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
Configuring Wireless Connection
Figure 111. Selecting the operating mode for the wireless network.
If you are not going to use the wireless connection, select the Turn off choice of the Mode radio
button. Click the Next button and then click the Apply button on the opened page. After clicking
the button, the Home / Information page opens.
If you want to connect portable devices to the network of the access point via wireless connection,
select the Access point choice of the Mode radio button. Click the Next button.
If you want to configure DAP-1360 as a repeater to connect to a wireless access point, select the
Repeater choice of the Mode radio button. Click the Next button.
If you want to configure DAP-1360 the access point as a client to connect to a wireless access point,
select the Client choice of the Mode radio button. Click the Next button.
Page 145 of 270
To Next Page
Loading...
