DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
Creating PPTP + Dynamic IP or L2TP + Dynamic IP WAN Connection
To create a connection of the PPTP + Dynamic IP or L2TP + Dynamic IP type, click the Add button
on the Net / WAN page. On the opened page, select the relevant value from the Connection
Type drop-down list and specify the needed values.
Figure 161. The page for creating a new connection. The General settings section.
Parameter Description
General settings
Interface A physical interface to which the new connection will be assigned.
Name A name for connection for easier identification.
Enable Select the checkbox to enable the connection.
Direction The direction of this connection.
Page 201 of 270
To Next Page
Loading...
