DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
Ping
On the System / Ping page, you can check availability of a host from the local or global network
via the Ping utility.
The Ping utility sends echo requests to a specified host and receives echo replies.
Figure 203. The System / Ping page.
To check availability of a host, enter the IP address or name of this host in the Host field, and select
a number of requests that will be sent in order to check its availability from the Count of packets
drop-down list. Click the Start button. After a while, the results will be displayed on the page.
Page 264 of 270
To Next Page
Loading...
