DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
DDNS
On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows
associating a domain name with dynamic IP addresses.
Figure 184. The Advanced / DDNS page.
To add a new DDNS service, click the Add button. In the line displayed, you can specify the
following parameters:
Parameter Description
DDNS Service
Select a DDNS provider from the drop-down list.
Host name The domain name registered at your DDNS provider.
User name
The username to authorize for your DDNS provider.
User password The password to authorize for your DDNS provider.
Update period
An interval (in minutes) between sending data on the access point's
external IP address to the relevant DDNS service.
After specifying the needed parameters, click the Apply button.
To edit parameters of the existing DDNS service, select a needed field in the relevant line of the
table, change its value, and click the Apply button.
To remove an existing DDNS service, select the checkbox located to the left of the relevant line in
the table and click the Delete button. Then click the Apply button.
Page 237 of 270
To Next Page
Loading...
