DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
Creating WAN Connection
PPPoE Connection
Figure 68. Configuring PPPoE WAN connection.
In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page.
Page 97 of 270
To Next Page
Loading...
