D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
On the next page, you need to enter the password for connection to the network.
Figure 118. Entering the password for connection to the wireless network.
Enter the password in the Network key field. If you don't need a password to connect to the
selected network, the Network key field is unavailable.
Click the Next button.
On the next page, the parameters of the network to which you want to connect and the entered
password are displayed. Make sure that the specified settings are correct and then click the Apply
button. After that, the wireless channel of DAP-1360 will switch to the channel of the wireless
access point to which you have connected.
After configuring the device as a client, you need to create a WAN connection with relevant
parameters for the WiFiClient interface.
After clicking the Apply button, the Home / Information page opens.
Page 152 of 270

D-Link DAP-1360 Specifications

Power

power input	5V DC/1.2 A
power adapter socket	external power adapter

Operating Environment

operating temperature	0 ˚C to 55 ˚C
storage temperature	10 ˚C to 70 ˚C
operating humidity	10% to 90% non-condensing

Weight and Dimensions

weight	215 grams
dimensions	147.5 x 113 x 31.5 mm