DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
On the next page, you can modify security settings of the WLAN.
!
The default security settings do not provide sufficient protection for the WLAN. Please,
specify your own security settings for the WLAN.
Select the Protected value from the Network Authentication drop-down list and enter a key (a
password that will be used to access your wireless network) in the Network key field. Use digits
and Latin characters. After applying this setting, the WPA-PSK/WPA2-PSK mixed
authentication type is specified for the WLAN of the access point.
When the Open value is selected, the Network key field is unavailable. After applying this
setting, the Open authentication type with no encryption is specified for the WLAN of the access
point.
Figure 121. Page for selecting a security mode for the wireless network.
Click the Next button to continue.
On the next page, the specified settings are displayed. Make sure that they are correct and then click
the Apply button. After clicking the button, the Home / Information page opens.
Page 155 of 270
To Next Page
Loading...
