DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the RADIUS settings and
WPA Encryption settings sections are available:
Figure 173. The WPA/WPA2 mixed value is selected from the Network Authentication drop-down list.
Parameter Description
WPA2 Pre-
authentication
The checkbox activating preliminary authentication (displayed only
for the WPA2 and WPA/WPA2 mixed authentication types).
IP address
The IP address of the RADIUS server.
Port A port of the RADIUS server.
RADIUS encryption key
The password which the access point uses for communication with
the RADIUS server (the value of this parameter is specified in the
RADIUS server settings).
WPA Encryption
An encryption method: TKIP, AES, or TKIP+AES. For the wireless
network operating modes which support 802.11n standard (see the
value of the Wireless mode drop-down list on the Wi-Fi / Basic
settings page), the AES value is only available.
WPA renewal
The time period (in seconds), at the end of which a new key for WPA
encryption is generated. When the value 0 is specified for this field,
the key is not renewed.
When you have configured the parameters, click the Apply button.
Page 217 of 270
To Next Page
Loading...
