DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
The following buttons are available on the page:
Control Description
Save
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the device's parameters.
Otherwise the changes will be lost upon hardware reboot of the
access point.
Reboot
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware WPS/RESET button
located on the back panel of the access point (see the Back Panel
section, page 11).
Backup
Click the button to save the configuration (all settings of the access
point) to your PC. The configuration backup will be stored in the
download location of your web browser.
Browse
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the access point)
located on your PC and upload it.
Logout
Click the button to exit the web-based interface.
Actions of the Save, Reboot, Factory, Backup, and Logout buttons also can be performed via
the top-page menu displayed when the mouse pointer is over the System caption.
Page 257 of 270
To Next Page
Loading...
