DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Access Point Mode)
Control Description
Port
A port of the host specified in the Server field. By default, the value
514 is specified.
After specifying the needed parameters, click the Apply button.
To disable logging of the system events, deselect the Logging checkbox and click the Apply
button.
On the System / System log / Log page, the events specified in the Logging level list are
displayed.
Figure 58. The System / System log / Log page.
To view the latest system events, click the Refresh button.
To save the system log to your PC, click the Export button and follow the dialog box appeared.
Page 82 of 270