DAP-1360 Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
Control Description
Wireless
The Wireless element displays information on Wi-Fi module
operation. To the left, the name of the access point is displayed. You
can change it in the editing mode.
Use the Hide Access Point switch ( / ) to forbid or allow other
users to see your wireless network.
Use the Enable/Disable Wireless switch ( ) to enable or
disable your wireless network.
To the right, the standards of devices which can connect to the
access point are displayed. You can select other standards from the
drop-down list.
Use the Enable/Disable password protection switch ( / )
to modify security settings of your wireless network. If you want to
view or change the password, switch to the editing mode of the
relevant field.
Wireless (Client Mode)
The Wireless (Client Mode) element displays operation of Wi-Fi
module in the client mode. To the right of the graphical
representation of another access point, its name and MAC address
are displayed.
Use the Disable client mode switch ( ) to disable the client
mode.
Wi-Fi Filter
The Wi-Fi Filter element displays the number of MAC addresses
specified in the MAC filter. The element is unavailable when the
Wi-Fi module is in the client mode. Place the mouse pointer over
the icon to view the list of MAC addresses, remove existing
addresses, or add new ones.
Use the Enable/Disable Wi-Fi filter switch ( ) to enable or
disable the Wi-Fi filter.
Use the drop-down list to the right of the element to quickly change
the mode of the filter (allow or forbid access to your wireless
network).
In this section, you can contact the technical support group (to send an e-mail). To do this, left-click
the support e-mail address in the bottom right corner of the page. After clicking the line, the e-mail
client window for sending a new letter to the specified address opens.
Page 94 of 270
To Next Page
Loading...
