DAP-1360U Wireless N300 Access Point & Router
User Manual
Configuring via Web-based Interface
Parameter Description
Dial on demand
Move the switch to the right if you want the access point to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Static IP address
Fill in the field if you want to use a static IP address to access the
Internet.
PPP IP extension
This option is used by some ISPs. Contact your ISP to clarify if this
option needs to be enabled. If it is required, move the switch to the
right.
PPP debug
Move the switch to the right if you want to log all data on PPP
connection debugging.
Page 69 of 158
To Next Page
Loading...
