D-Link DAP-2690 - AP Array

38D-Link DAP-2690 User Manual
Section 3 - Conguration
AP Array
Check this box to enable the AP array function. The three modes
that are available are Master, Backup Master, and Slave. APs in the
same array will use the same conguration. The conguration
will sync the Master AP to the Slave AP and the Backup Master
AP when a Slave AP and a Backup Master AP join the AP array.
Enter a name for the AP array you have created.
Enter a password that will be used to access the AP array you
have created.
Click the button to initiate a scan of all the available APs on the
network.
This displays the status of the current AP array.
Enable AP Array:
AP Array Name:
AP Array
Password:
Scan AP Array
List:
Connection
Status:
The AP Array window allows users to create a set of devices on a network that are organized into a single group in order to increase ease of
management. Once a user has made the desired settings, click the Save button to let the changes take eect.