DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Wi-Fi
In this menu you can specify all needed settings for your wireless network.
Basic Settings
In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface
of the access point and configure the basic and additional wireless networks. To configure the
2.4GHz band or 5GHz band, go to the relevant tab.
Figure 99. Basic settings of the wireless LAN in the 2.4GHz band.
Page 117 of 235
To Next Page
Loading...
