DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Remote Access
This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / Remote Access page, you can configure access to the web-based interface
of the access point. By default, the access from external networks to the access point is closed. If
you need to allow access to the access point from the external network, create relevant rules.
Figure 131. The Advanced / Remote Access page.
To create a new rule, click the ADD button ( ).
Figure 132. The window for adding a rule for remote management.
Page 173 of 235
To Next Page
Loading...
