DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
WAN Reservation
This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Connections Setup / WAN Reservation page, you can enable the WAN backup
function, which provides you with uninterrupted access to the Internet. When your main connection
breaks down, the access point activates the backup connection; and when the main channel is
recovered, the access point switches to it and disconnects the reserve one.
Figure 98. The Connections Setup / WAN Reservation page.
To activate the backup function, create the main WAN connection and one or several reserve WAN
connections. After that go to the Connections Setup / WAN Reservation page, move the
Enable switch to the right, and specify the needed values in the fields displayed on the page.
Parameter Description
Basic connection
From the drop-down list, select a WAN connection which will be
used as the main one.
Backup connections
Click the ADD CONNECTION button and, from the drop-down list
displayed, select a WAN connection which will be used as the
reserve one. You can add several WAN connections .
To remove a reserve connection from the list, click the
Delete icon ( ) in the line of the connection.
Page 115 of 235
To Next Page
Loading...
