DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Connections Setup
In this menu section you can configure basic parameters of the access point's local area network and
connection to the Internet (create one or several WAN connections and define rules for their use).
LAN
To configure the access point's local interface, go to the Connections Setup / LAN page.
IPv4
Go to the IPv4 tab to change the IPv4 address of the access point, configure the built-in DHCP
server, specify MAC address and IPv4 address pairs, or add own DNS records.
Figure 64. Configuring the local interface. The IPv4 tab. The Local IP Address section.
Page 79 of 235
To Next Page
Loading...
