DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter Description
IKE-SA lifetime
The lifetime of IKE-SA keys in seconds. After the specified period it is
required to renegotiate the keys. The value specified in this field
should be greater than the value specified in the IPsec-SA lifetime
field.
Aggressive Mode
The mode which provides faster operation as it skips several stages of
negotiation of the authentication procedures.
Move the switch to the right to enable the mode.
Move the switch to the left to disable the mode.
The switch is displayed on the page if 1 is selected from the IKE
version drop-down list.
IKE version
IKE (Internet Key Exchange) is a protocol of keys exchange between
two hosts of VPN connections. Select a version of the protocol from
the drop-down list.
The Second Phase
Encryption mode
Select an encryption mode from the drop-down list.
Encryption key
length
The encryption key length in bits.
Second phase
encryption algorithm
Select an available encryption algorithm from the drop-down list.
Hashing mode
Select a hashing mode from the drop-down list.
Size of hash The length of the hash in bits.
Hashing algorithm
Select a hashing algorithm from the drop-down list.
Enable PFS
Move the switch to the right to enable the PFS option (Perfect
Forward Secrecy). If the switch is moved to the right, a new
encryption key exchange will be used for Phase 2. This option
enhances the security level of data transfer, but increases the load on
DAP-600P.
Second phase
DHgroup type
A Diffie-Hellman key group for Phase 2. Select a value from the drop-
down list. The drop-down list is available if the Enable PFS switch
is moved to the right.
Page 186 of 235
To Next Page
Loading...
