DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Figure 145. The page for adding a virtual server.
You can specify the following parameters:
Parameter Description
General Settings
Enable
Move the switch to the right to enable the server.
Move the switch to the left to disable the server.
Template
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
Interface
A WAN connection to which this virtual server will be assigned.
Protocol
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Page 195 of 235
To Next Page
Loading...
