DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
In the opened window, you can specify the following parameters:
Parameter Description
MAC address
The MAC address of a device from the access point's LAN. You can
enter the MAC address of a device connected to the access point's
LAN at the moment. To do this, select the relevant device from the
drop-down list (the field will be filled in automatically).
Name Enter a name for the rule for easier identification. Optional.
Mode
Select an operating mode of the Yandex.DNS service for this rule.
• Protection off: When this value is selected, the service
provides the DNS server with no restrictions on access to
unsafe web sites.
• Safe: When this value is selected, the service blocks access
to malicious and fraudulent web sites.
• Child: When this value is selected, the service blocks access
to malicious and fraudulent web sites and blocks access to
adult content.
After specifying the needed parameters, click the SAVE button.
To edit a rule for filtering, select a relevant line of the table, in the opened window, change the
needed values and click the SAVE button.
To remove a rule for filtering, select the checkbox located to the left of the relevant rule and click
the DELETE button ( ). Also you can remove a rule in the editing window.
After completing the work with rules, click the APPLY button.
Page 225 of 235
To Next Page
Loading...
