DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
To assign a specific filtering profile for a device, click the ADD button ( ) in the Device List
section or left-click the name of the filtering profile in the line of the device for which a profile
should be assigned in the Known Clients section.
Figure 167. The SkyDNS / Devices page. The window for adding a rule.
In the opened window, specify the following parameters:
Parameter Description
MAC address
The MAC address of a device from the access point's LAN to which
the specified filtering profile will be applied. You can enter the
MAC address of a device connected to the access point's LAN at the
moment. To do this, select the relevant device from the drop-down
list (the field will be filled in automatically).
Profile
Select the filtering profile which will be used for the device with the
specified MAC address from the drop-down list.
Hostname Enter a name for the rule for easier identification. Optional.
After specifying the needed parameters, click the SAVE button.
To edit a rule, select the relevant line in the table. In the opened window, change the needed
parameters and click the SAVE button.
To remove a rule, select the checkbox located to the left of the relevant line of the table and click
the DELETE button ( ).
Page 229 of 235
To Next Page
Loading...
